Shimadzu HPLC System
- Make Shimadzu
- Hertz 50Hz/60Hz
- Model -
- Serial -
- Weight 118
- Voltage 240V
- Working Working
- Warranty 30-Day Warranty, 100% Parts and Labor
- Dimensions 60×63×77 in
- Shipping Type Freight
- Item Condition Pre-owned
- Manufacturing Date -
Shimadzu HPLC System
Reservoir Tray 228-45041-91
Shimadzu DGU-20A3 Degasser 228-450-32:
Specifications: | |
Number of Flow Lines | 3 |
Degassing Performance | UV absorption difference with and without degasser is over 300 mAU (using UV absorption detector, wavelength 210 nm, sensitivity 0.5 AU, flowing Methanol saturated with dissolved oxygen (HPLC grade) at 25°C with 1 ml/min) |
Max. Operating Flow Rate | 20 mL/min per flow line (using deionized water –applicable range varies depending on the solvent being delivered). |
Internal Capacity | 380 µL per flow line |
Pressure Resistance | 98 kPa (1 kgf/cm2) or less Only when suctioning with the delivery unit. Pressurized delivery to the degasser is prohibited.) |
Tubing | 3 mm O.D. x 1.5 mm I.D. PTFE tubing |
Materials Contacting Solvents | Special synthetic polymers designed for all solvents (degassing membrane), PEEK (connector joints) |
External Output | When system self-diagnostics detects an abnormality, a signal is output to the external terminal (ALARM) |
Self-cleaning | Includes mechanism that extends vacuum pump life by drawing in air when the vacuum pump is running |
Dimensions | 10.25" W x 16.55 x 2.85" H (26 x 42 x 7.2 cm) |
Weight | 11 lbs. (5 kg) |
Operating Conditions | 4 – 35°C, 20 – 85% humidity |
Power supply | +24 V (powered via connection by remote cable to delivery unit) |
Shimadzu LC-20AD HPLC Pomp 228-45002-38:
Plunger capacity: 10µL
Maximum discharge pressure: 40MPa
Flow rate setting range: 0.0001 to 10,0000 ml/min
Flow Rate Accuracy: Not more than 1% or 0.5 µL/min, whichever is greater (0.01 to 2 ml/min)
Flow Precision: Not more than 0.06% RSD or 0.02 min SD, whichever is greater
Pulsation: 0.1 MPa (for water at 1.0 ml/min and 7 MPa)
Solvent delivery under constant pressure: Supported
Plunger flushing mechanism: manual flushing or automatic flushing with optional product
Safety precautions: liquid leakage sensor, high/low pressure limits
Gradient type: Low pressure mixing
Number of mixed solvents: 4 max
Dimensions (WxHxD): 260 x 140 x 420 mm
Weight: 10 kg
SIL-20AC 228-45007-28:
Into the varied landscape of HPLC autosamplers, the Prominence Series autosampler enters built on a solid foundation. Following the principle of Kaizen*, the SIL-20 incorporates and improves on many of the features that made its predecessors leaders in the mar- ket. Use of unique coatings and materials in critical areas, state-of-the-art electromechanical components, and innovative control through a Web browser ensure the SIL-20 will continue to set the standard that others will strive to match. Whatever you require – near-zero carryover, fast cycle times, or exceptional reproduc- ibility – the Prominence autosamplers will meet your need.
Injection Method | Metering pump, variable volume, no sample loss |
Injection Volume | 0.1 to 100 μL (std), 1 to 2,000 μL (opt) |
Sample Capacity |
70 1.5 mL vials (incl. std.); Control Rack: 10 1.5 mL vials |
Optional Sample Racks for: |
175 1 mL vials 2 384 well MTP |
Injection Volume Accuracy | + 1% (50μL, n=10) |
Injection Volume Precision | RSD < 0.3% (10μL) |
Carryover | 0.005% (Chlorhexidine) |
Sample Aspiration Rate | 0.1-15 μL/sec (0.1μL steps) |
Rinsing Rate | 1-35 μL/sec (1μL steps) |
Rinsing Options | Before Aspiration, After Aspiration, Before and After Aspiration, or None (Optional rinse pump for multiple solvent wash available) |
Temperature Control | 4ºC-40ºC w/ built-in dehumidifier |
pH Range | 1 to 14 |
Operating Temperature | 4ºC to 35ºC (non-condensing atmosphere) |
Dimensions & Weight | 260W x 415H x 500D, 30kg |
Power Requirements | AC110-120V, 300VA, 50/60Hz |
SPD-20A detector 228-450003-38:
Specifications: | |
Light Source | Deuterium (D2) lamp, tungsten (W) lamp |
Number of Diode Elements | 512 |
Wavelength Range | 190 to 800 nm |
Bandwidth, Slit Width | 1.2 nm (high-resolution mode), 8 nm (high-sensitivity mode) |
Wavelength Accuracy | 1 nm max. |
Wavelength Precision | 0.1 nm max |
Noise | 0.6 X 10-5 AU (under specified conditions) |
Drift | 5 X 10-4 AU/h (under specified conditions) |
Linearity | 2.0 AU (ASTM standard) |
Functions | Contour output, spectrum library, MAX plotting |
Optical Wavelength | 10 mm, capacity: 10µL, withstand pressure: 12 MPa |
Cell Temperature-Control Range | 5°C above room temperature to 50°C |
Web Control | Parameter setting, log management, management of consumable parts, etc. |
Buffer Memory | Approx. 20 minutes of data in the entire wavelength region (only when using LCsolution) |
Operating Temperature Range | 4°C to 35°C |
Dimensions | 10.24" W x 16.54 x 5.51" H (26 x 14 x 42 cm) |
Weight | 26.46 lbs. (12 kg) |
Power | 100V, 50/60Hz, 150 VA |
CTO-20AC 228-45010-28:
Cooling method: Electronic cooling
Temperature-setting range: 4°C to 85°C
Temperature-control precision: 0.1°C max.
Temperature-control range: 10°C below room temperature to 85°C
Storage capacity: 10 columns, max 25 cm length
Storable devices: 2 manual injectors, gradient mixer, 2 high-pressure flow-line selection valves, etc
Time program: Linear temperature program supported
Safety measures: Solvent sensor, temperature fuse, temperature upper limit
Operating temperature range: 4°C to 35°C
Testimonials
“REUZEit has been a great partner for our used equipment needs and always provide timely updates of new arrivals of consigned equipment.”
“Great company to work with. Tammy completed our first international equipment shipment with ease.”
“Fast response, open to adjusting schedule as needed, and great customer interaction.”