Peak Scientific Acrion N2 Nitrogen Generator

Peak Scientific Acrion N2 Nitrogen Generator

Gas on request

  The generator will produce nitrogen on demand. When the application is in operation and requires gas flow, the system it is connected to will supply it to meet the requirements of the application. If the gas application requirement stops, the system also stops. If the application demand starts again, the system will detect the gas demand and automatically restart to meet the demand.

Generator environment

  The generator is designed for indoor use only. It must be installed alongside the application(s) it provides. If this is not convenient, the unit can be placed elsewhere. However, take the length of the pipes into account, as pressure losses can result from longer pipes. Generator performance (like all advanced equipment) is affected by environmental conditions. Proximity to air conditioning outlets should also be taken into account. These can sometimes give rise to “pockets” of air with high relative humidity. Using the device in such a bag may affect performance. The airflow around the device must also be taken into account. It is recommended to maintain an air gap of 75 mm (3”) on both sides and at the rear of the unit. Refer to the drawing below for the general dimensions of the unit.

Specifications

• Dimensions ( L x W x H ) : 54 x 42 x 16 cm

• Weight ( kg ) : 12

• Model Number : Acrion N2

• Serial Number : 720010266

• Volts ( V ) : 100 - 230

• Hertz ( Hz ) : 50 / 60

• Made in Scotland